Cribs Safety for Your Baby
Posted by Babies - 11/03/10 at 08:03 pmFor first time mums and dads, one of the things of uttermost seriousness on the must-do list is to get a baby crib for the imminent addition to the family. With so many styles and features to choose from, it can be difficult to make only 1 selection. One thing on which parents should never compromise is the crib’s safety.
All baby cribs manufactured must meet consumer goods Safety Commission standards. It is mandatory, from the least expensive cribs to million dollar baby cribs to do so. In addition, if the crib has a validation label from the Juvenile Products Manufacturers’ organisation, you can rest assured the crib maker took the extra step of adhering to voluntary safety standards set by the North American Society for Testing and Materials.
There are some safety features on which parents should never compromise, particularly when considering secondhand or hand-me-down cribs. This is as most crib-related wounds tend to occur with older cribs. One of the easiest techniques of determining if the crib is safe enough is to test if the crib has ever been recalled. If it has , then your options are simple : lose it and look for another one! If it is’s not on the recall list, then a further visual inspection is in order to set your mind at ease.
Any parent should look the space between the bars or slats on a crib. These vertical components should not be more than two 3/8′ apart. A space that surpasses the stated width means there’s a chance the baby can squeeze into the space and subsequently get stuck. If you do not have a tape measure handy, you can always put up with a soda can. This is about the same width, and if it fits nicely between the slats, then the crib is a no-go.
In the same vein, all mattresses employed in a crib should be a tight fit to avoid posing a risk to the baby’s safety. A mattress is too small when there is a width that is 2 fingers wide, or more, between the mattress and the wall of the crib. Luckily , most mattresses are made to fit most standard-sized cribs. The mattress should additionally be firm to provide sufficient support for the baby.
All cribs, even million buck baby cribs, should have corner posts that are less than 0.06 inches high. Cribs are different from grownup beds in the way that a baby faces a strangulation hazard from such posts that surpass this measurement. Clothing can get caught on a post and a baby is unlikely to be ready to free himself. When assembling a crib, ensure that all screws are in place before they are tightened. Likewise, the crib should not have splinters or cracks. Any paint used on the crib should be lead-free enamel paint that’s appropriate for household use.
it might take some time to settle on the best crib for your baby, but doing the honest thing requires time and shouldn’t be rushed.
You can have more info’s about million dollar baby cribs, at http://babyhelpsite.net/million-dollar-baby-cribs-convertible-cribs/, where you can read a lot of details on million dollar baby cribs
